Show Notes

I prepped some thigs that will make progress faster in the future.

  1. I set up a “cutting station” where I can easily measure lengths of wood to within 1mm accuracy, which I will need to do frequently while making the outer spiral track, which at this point consists of a single segment of track about 4cm long.

2018 aug 3 cutting station

  1. I cut a piece which will correctly hold the triple splitter bars at the right distance from each other on the upper end.

2018 aug 3 showing spacer between triple splitter

  1. In the second livestream, I added a bit to the test outer spiral.

2018 aug 3 first test section of outer spiral

2018 aug 3 next rail on outer spiral

Second livestream in which I add a rail to outer spiral

For fun, here are the frames I took today.

00010 002 09 X1 1644 00010 002 09 X1 1645 00010 002 09 X1 1646 00010 002 09 X1 1647 00010 002 09 X1 1648 00010 002 09 X1 1649 00010 002 09 X1 1650 00010 002 09 X1 1651 00010 002 09 X1 1652 00010 002 09 X1 1653 00010 002 09 X1 1654